Model : VP-DIIIS; VP-IIIS

Lift Head : 8 m
Number of Exhaust Heads : 2
Storage Tank Capacity : 15 L
Body Material : 304 Stainless Steel
Maximum Vacuum Degree : -0.098 MPa
Storage Tank Capacity : 15 L
Designed based on the small experimental area, compatible with rotary evaporators, and suitable for other routine vacuum filtration needs in laboratories.

Model : LTC-510; LTC-520; LTC-530; LTC-540

Lift Head : 4 m
Temperature Sensor : PT100
Liquid Storage Capacity : 5 L
Circulating Pump Flow Rate : 7 L/min
Cycle Mode : External circulation
Bath Opening Diameter : 215 mm
Temperature Range : -10, -20, -30, -40 ℃–RT
Designed to efficiently circulate coolant in systems requiring precise temperature control at low temperatures, compatible with rotary evaporators, vacuum freeze drying oven, etc

Model : LTC-1020; LTC-1040; LTC-1004
Lift Head : 4/ 4/ 5.6 m
Compressor : 1/ 1.5/ 8 P
Refrigerant : R22/ R404/ R404
Liquid Storage Capacity : 10/ 10/ 100 L
Bath Opening Diameter : 260/ 260/ 510 mm
Circulating Pump Flow Rate : 7/ 7/ 60 L/min
Temperature Range : -20 ℃–RT/ -40 ℃–RT/ -40 ℃–RT
Designed to efficiently circulate coolant in systems requiring precise temperature control at low temperatures, compatible with rotary evaporators, vacuum freeze drying oven, etc.

Model: LTC-2010; LTC-2020; LTC-2040

Lift Head : 8 m
Compressor : 2/ 3 P
Refrigerant : R22/ R404
Liquid Storage Capacity : 20 L
Bath Opening Diameter : 300 mm
Circulating Pump Flow Rate : 17 L/min
Temperature Range : -10 ℃–RT/ -20 ℃–RT/ -40 ℃–RT
Designed to efficiently circulate coolant in systems requiring precise temperature control at low temperatures, compatible with rotary evaporators, vacuum freeze drying oven, etc.

Model : LTC-4004

Cycle Mode : Closed cycle
Lift Head : 2.7/3.4 m (50/60 Hz)
Maximum Flow : 16/19 L/min (50/60 Hz)
Temperature Usage Range : -20 ℃–RT
Condition Liquid Temperature RT 20 ℃
Temperature Sensor : PT100 thermistor
Designed to efficiently circulate coolant in systems requiring precise temperature control at low temperatures, compatible with rotary evaporators, vacuum freeze drying oven, etc.

Model : LTC-5020; LTC-5030; LTC-5040

Lift Head : 4.6 m
Compressor : 4P/ 5P/ 7P
Refrigerant : R404/ R22
Liquid Storage Capacity : 50 L
Bath Opening Diameter : 410 mm
Circulating Pump Flow Rate : 23 L/min
Temperature Range : -20 ℃–RT/ -30 ℃–RT/ -40 ℃–RT
Designed to efficiently circulate coolant in systems requiring precise temperature control at low temperatures, compatible with rotary evaporators, vacuum freeze drying oven, etc.

Model : MF-10-7P

Thermal Couple : K type
Pre-Vacuum Degree : -0.1 MPa
Shaking Mode : Convolution
Flow Meter Range : 0.16–1.6 cubic meters/hour
Short-Term Maximum Temperature : 1100 ℃
Chamber Material : 310S high-temperature stainless steel
Designed for heating (sintering) products in a pre-vacuum atmosphere, and also for use without pre-vacuuming, using a protective gas washing furnace to heat products under an atmosphere.

Model : SK-V04; SK-V06; SK-V08; SK-V10

Shake Range : 40 mm
Vessel Number : 4 / 6 / 8 / 10 pcs
Shake Speed : 100–300 T/Min
Shake Method : Vertical Shake
Time Set Range : Max 15 minutes
Separatory funnel shakers are commonly used in laboratories for mixing difficult media, such as viscous liquids and solid dispersions, and for liquid-liquid extractions.

Model: RE-2000AR; RE-2000BR; RE-2000CR
 
Rotating Flask Capacity: 1 L (optional 2 L)
Receiving Flask Capacity: 1 L (optional 2 L)
Condensation Area: About 0.17 ㎡
Maximum Evaporation Capacity (Water): About 0.9 L/h
Rotational Speed: 0–200 rpm
Lifting Travel Range: 0–150 mm
The digital display ensures higher precision for your experimental measurements.

Model: RE-3000AR; RE-3000BR; RE-3000CR
 
Rotating Flask Capacity: 3 L
Receiving Flask Capacity: 2 L
Condenser Size (Dia.×H): 90×430 mm
Maximum Evaporation Capacity (Water):About 1.5 L/h
Rotational Speed: 20–200 rpm
Lifting Travel Range: 0–150 mm
Rotary evaporator enables fast, gentle solvent removal under reduced pressure for laboratory concentration and purification.