Model : SD-2

Drying Time : 1.0–1.5 s
Maximum Water Evaporation : 2000 mL/h
Inlet Air Temperature : 30–250 ℃±1 ℃
Outlet Air Temperature : 30–120 ℃±1 ℃
Spray System : 0.7 mm diameter dual-fluid nozzle
Mini spray dryer is compact in size, easy to operate, suitable for handling small batches of samples, and widely used in scientific research and small-scale production.

Model: SD-3; SD-3S; SD-3R
 
Display: 9" Touchscreen
Min. Sample Volume: 30 mL
Inlet Temp. : 30–300 ℃, Accuracy ±1℃
Evaporation: 1500–2500 mL/h
Average drying time: 1.0–1.5 s (suitable for heat-sensitive samples)
Air Compressor: Built-in
With a minimum sample volume of 30 mL and completes the drying process in approximately 1.0 to 1.5 seconds, particularly suitable for heat-sensitive materials. Widely used in universities, research institutes, food, pharmaceutical, and chemical industries.

Model: SD-3LT
 
DDisplay: 9" Touchscreen
Min. Sample Volume : 30 mL
Max. Flow Rate: 2.3 m3/min
Low-Temperature Vacuum: 0.03–0.06 Mpa, rapid drying at 50–80°C.
Modular design: Supports standard spraying and low-temperature drying.
With vacuum to lower the solvent vaporization temperature, achieves instantaneous spray drying from 50°C to 80°C, designed for heat-sensitive materials.

Model: SD-3SR
 
Display: 9" Touchscreen
Min. Sample Volume: 30 mL
Feed Rate: 30–2000 mL/h
N₂ Flow Range: 16-160 L/min
Real-time O₂ Monitoring: Auto-protection at >3%
High Solvent Recovery System: Spiral stainless steel condensing tube with circulating silicone oil
Closed-loop inert gas (nitrogen) circulation system as the drying medium, performing the drying process in an inert environment.