Model : SWQ-200
 
Wavelength switching : Automatic switch
Wavelength accuracy : ± 1nm
Size(WxDxH)(mm) : 270x190x130

Model : DTD-24
 
Dissolved sample quantity : 12x2 or 24 samples/batch
Temperature setting range : Room temperature -200 ℃
Environmental temperature for use : - 5~45℃
Temperature control accuracy : 165/123 ± 0.5 ℃
Heating time : Reach the set temperature within 10 minutes

Model : DTD-30
 
Dissolved sample quantity : 15x2 or 30 samples/batch
Temperature setting range : Room temperature -200 ℃
Environmental temperature for use : - 5~45℃
Temperature control accuracy : 165/123 ± 0.5 ℃
Heating time : Reach the set temperature within 10 minutes

Model: DTD-06
 
Display: 3.5-inch TFT touch screen
Throughput: 6 tubes
Sample Volume: 0–10 mL
Temp. Resolution: 0.1 ℃
Temp. Accuracy: ±1.5 ℃

Model: DTD-D24
 
Display: 7-inch full-color capacitive touch screen
Sample Volume: 0–10 mL
Temp. Control Accuracy: 0.1℃
Temp. accuracy: ±1.5℃

Model: DTD-12
 
Display and Input: 4.3-inch capacitive touchscreen
Digestion Quantity: 12 tubes
Digestion Capacity: 0–10 mL
Digestion Hole: Dia: 16.6 mm, Depth: 65 mm

Model: SD-3; SD-3S; SD-3R
 
Display: 9" Touchscreen
Min. Sample Volume: 30 mL
Inlet Temp. : 30–300 ℃, Accuracy ±1℃
Evaporation: 1500–2500 mL/h
Average drying time: 1.0–1.5 s (suitable for heat-sensitive samples)
Air Compressor: Built-in
With a minimum sample volume of 30 mL and completes the drying process in approximately 1.0 to 1.5 seconds, particularly suitable for heat-sensitive materials. Widely used in universities, research institutes, food, pharmaceutical, and chemical industries.

Model: SD-3LT
 
DDisplay: 9" Touchscreen
Min. Sample Volume : 30 mL
Max. Flow Rate: 2.3 m3/min
Low-Temperature Vacuum: 0.03–0.06 Mpa, rapid drying at 50–80°C.
Modular design: Supports standard spraying and low-temperature drying.
With vacuum to lower the solvent vaporization temperature, achieves instantaneous spray drying from 50°C to 80°C, designed for heat-sensitive materials.

Model: SD-3SR
 
Display: 9" Touchscreen
Min. Sample Volume: 30 mL
Feed Rate: 30–2000 mL/h
N₂ Flow Range: 16-160 L/min
Real-time O₂ Monitoring: Auto-protection at >3%
High Solvent Recovery System: Spiral stainless steel condensing tube with circulating silicone oil
Closed-loop inert gas (nitrogen) circulation system as the drying medium, performing the drying process in an inert environment.

Model : WH-BS40
 
Range : 0.05 to 200mmol/L
Range (German Degree) : 0 to 1122°dH
Calibration Points : 2 to 5 points
Sizes(W×D×H)(mm) : 175(L)×40(Dia.)
Reliably measure the concentration of individual ions in water with our portable bluetooth water hardness meter.