Model : HMG-H500
 
Range of Rotation : 8000-28000r/min
Speed Display : Calibration
Speed Mode : Gear speed regulation
Material of Contact Material : 316L stainless steel
Shipping Size (W×D×H)(mm) : 803x400x140
The high-shear homogenizer is suitable for a wide range of laboratory applications in sample preparation, toxicology and food science.

Model: CD-C
 
Orbital Diameter: 4 mm
Capicity: 8×2 mL
Speed Range: 0–3000 rpm (Adjustable)
Speed Display: Scale

Model : HMG-1500

Range of Rrotation : 300-23000 r/min
Processing Capacity : 30-1500 mL
Rated Torque : 68 N·cm
Laboratory high-speed dispersion homogenizer is suitable for further dispersion and homogenization of pulverized experimental materials in the liquid medium

Model : HMG-BHS11; HMG-BS09; HMG-BG08
 
Control Mode : Microcomputer control
Parameter Storage : 8-segment combination programming
Slap Speed : 3-12 times/s
External Size (WxDxH)(mm) : 460x250x330; 460x250x330; 460x250x330
The beating type aseptic homogenizer enables powerful, quiet homogenisation in sample preparation.

Optional Cutter Head for HMG-25 & HMG-D25 & HMG-H500 & HMG-DH500

Optional cutter head for HMG-25, HMG-D25, HMG-H500 & HMG-DH500

Optional cutter head for HMG-H6 & HMG-P10

Model: SD-3; SD-3S; SD-3R
 
Display: 9" Touchscreen
Min. Sample Volume: 30 mL
Inlet Temp. : 30–300 ℃, Accuracy ±1℃
Evaporation: 1500–2500 mL/h
Average drying time: 1.0–1.5 s (suitable for heat-sensitive samples)
Air Compressor: Built-in
With a minimum sample volume of 30 mL and completes the drying process in approximately 1.0 to 1.5 seconds, particularly suitable for heat-sensitive materials. Widely used in universities, research institutes, food, pharmaceutical, and chemical industries.

Model: SD-3LT
 
DDisplay: 9" Touchscreen
Min. Sample Volume : 30 mL
Max. Flow Rate: 2.3 m3/min
Low-Temperature Vacuum: 0.03–0.06 Mpa, rapid drying at 50–80°C.
Modular design: Supports standard spraying and low-temperature drying.
With vacuum to lower the solvent vaporization temperature, achieves instantaneous spray drying from 50°C to 80°C, designed for heat-sensitive materials.

Model: SD-3SR
 
Display: 9" Touchscreen
Min. Sample Volume: 30 mL
Feed Rate: 30–2000 mL/h
N₂ Flow Range: 16-160 L/min
Real-time O₂ Monitoring: Auto-protection at >3%
High Solvent Recovery System: Spiral stainless steel condensing tube with circulating silicone oil
Closed-loop inert gas (nitrogen) circulation system as the drying medium, performing the drying process in an inert environment.