Application:
It is widely used and with full functions. About the solid mode, with functions of measuring DIN volume abrasion
loss and expansibility of rubber, actual density and apparent density of powder, oil content of oil bearing, density
of high-density products. etc.
About the liquid mode, it adopts the memoryless dynamic measurement method: with function of measuring density
with three modes, get out of the cumbersome operation of re-calibrate when change weight; with function of displaying
concentration, density and baume.
It is suitable for the field of quality management, cost control, new formula researching, new materials researching,
scientific academies, researching key laboratories, quality inspection. etc.
Advantage:
1. No need to open and close the lid, simple operation, shorter time measuring, according to the specification
of new materials laboratory.
2. Show the percentage composition of mixed samples for researching and developing new materials.
3. Automatically judge whether the density is qualified or not, with prompt alarm.
4. With solution compensation function, whether liquid or water can be used as a medium for measurement.
5. With functions of setting actual water temperature, measuring density of medium, and density of water proof medium.
6. With function of setting aerostatic buoyancy and the bound of density.
7. Adopt the completed high-capacity measurement accessories with the transparent injection mould tank, which is resistant
to wear, fall off and corrosion.
8. Density value of samples with the temperature from normal to 100 ℃ can be measured.
9. Take samples conveniently. Only need 50CC would be okay.
10. It is very easy to clean the measurement cup, and no limitation of the size of pycnometer caliber.
11. Adopt the completed special windproof and dustproof cover, which makes the combination convenient and durable.
12. Volatile liquid, corrosivity liquid, vicious liquid, strong acid and strong lye liquid can be measured quickly.
13. With RS-232C interface (standard); Printer is optional.
Specification:
Model DME-120PSL DME-300MSL Capacity 120 g 300 g Display LCD LCD Density Resolution 0.0001 g/cm3 0.001 g/cm3 Weight Range 0.001—120 g 0.005—300 g Density Range 0.0001—99.9999 g/cm3 0.001—99.999 g/cm3 Solid Mode Measuring Solid
Items
Density of all forms of solid, including metal, rubber, plastic, film, floating body,
powder, foam, viscous body, structure, tubing, wood, sponge, glass, pitch, cement,
soil, gem, paper, concrete, graphite, coal, rock, ceramic.etc.
(cover the products of hygroscopicity, non-absorbency, high-viscosity)
Measuring Mode Archimedes principle A. general solid measuring method B. porosity materials saturation mode C. porosity materials surface covering method mode. D. professional constant volume mode method E. professional rubber abrasion loss and expansibility mode method
F. professional hygroscopicity mode method G. professional oil length mode method Measurable Project Density of general non-absorbency solid Density of porosity materials Oil length of oil bearing Porosity of porosity materials DIN volume abrasion loss of rubber Powder density Water absorption rate Measuring Time About 5 seconds Memory Method Memory in shorter time by one procedure Specific Gravity
Measurement Frame
Completed injection forming professional specific gravity measurement frame
(size: length 13.5 mm×wide 5 mm×high 11.6 mm)
Measurement Tank Completed injection forming transparent professional measurement tank
(size:length 16.9 mm×wide 9.8 mm×high 8.3 mm)
Result Display Display according to the model: density, specific gravity, apparent density,
volume density, wet density, total porosity, effective porosity, oil content,
water absorption, wear loss, wear index,expansibility,volume and so on.
Function Setting Water temperature setting,density setting of medium of comparative solution,
density setting of medium of water proofing treatment, bound setting,aerostatic
buoyancy setting, loss value setting of fixed weight of reference glue,loss value
setting of weight of reference glue,density setting of reference glue.
Mixed Material
Percentage
Function introduction Automatically read the percentage of the main material in the two kinds
of mixed materials
Setting Freely set the density value of main material and subordinate material
Display Density value, percentage of main material Liquid Mode Measurement Type a:Mobility liquid, vicidity liquid, volatile liquid, corrosivity liquid, high temperature liquid,
suspension liquid, emulsion and so on.
b:Alcohol, scaling powder, essence, blood, sodium chloride, glycerol, electrolyte,
diesel,refrigerating, hydrofluoric acid, dichloromethane, vitriol.
Measurement Principle Archimedes principle displacement method Measurement Mode 3 groups Measurement Time About 5 seconds Memory Mode Memory in shorter time by one procedure Result Display Density and baume Specific Gravity
Measurement Frame
Stainless steel specific gravity measurement frame Function Setting Temperature setting, density setting, measurement weights setting of
standard sensor ball and weights setting in the water.
Measurement Testing Distilled testing Calibration Auto correction with one button, auto detection. Output Interface RS-232 interface, output and print testing data conveniently Standard Accessories Tank, testing board, tweezers,thermometer, 100g weight, windproof and
dustproof dust cover, 1 set of measuring floating body parts, power transformer,
standard liquid measurement assembly.
Optional Accessories Printer, anti-corrosive liquid measurement assembly Power Supply 220/110 V, 50/60 Hz External Size (W×D×H)(mm) 195×230×197 Shipping Size (W×D×H)(mm) 440×180×345 N.W./G.W. (kg) 1.6 / 4.5 1.8 / 4.5
English
