Capacity : 300 g Display : LCD Density Resolution : 0.001 g/cm³ Weight Range : 0.005—300 g Density Range : 0.001—99.999 g/cm³ The DME-300SLE has a wide range of applications, including measuring the density of solid materials, plastics, powders and liquids.
Solid and liquid densimeter is suitable for the field of quality management, cost control, new formula researching and material studying and so on, can be applied to measure the density of general solid material and plastic particle, powder and liquid.
Solid and Liquid Densimeter Feature:
1. Display the density of solid and liquid quickly, simple operation and stable performance.
2. With functions of automatic zero tracking, buzzer warning, and overload warning.
3. With actual water temperature compensation function.
4. With solution compensation function which is necessary if to use liquid other than water as a medium for measuring.
5. Adopt the unicase high-capacity measuring accessories with the transparent injection mould tank, which is resistant to wear, fall off and corrosion.
6. Adopts the unicase dedicated wind and dust cover, which makes the combination convenient and durable.
7. Density value can be showed by one procedure and it can measure repeatedly continuously rapid.
8. Coordinate with the operation of thermostatic tank to measure the proportion with the required temperature.
9. It is very easy to clean the measuring cup, not limitation of the size of pycnometer caliber.
10. Volatile liquid, corrosivity liquid, vicious liquid, strong acid and strong lye liquid can be measured quickly.
11. With RS-232C interface (standard); Printer is optional.
Solid and Liquid Densimeter Specification:
Model
DME-300SLE
Capacity
300 g
Display
LCD
Density Resolution
0.001 g/cm³
Weight Range
0.005—300 g
Density Range
0.001—99.999 g/cm³
Solid Mode
Measuring
Density of any form solid: metal, rubber, plastic and particle, film, floating
Temperature setting, density setting, measuring weights setting of standard sensor ball and weights setting in the water
Measuring Testing
Distilled testing
Calibration
Auto correction with one button, auto detection.
Output Interface
RS-232 interface, output and print testing data conveniently
Standard Accessories
Tank, testing board, tweezer, thermometer, 100 g weight, wind and dust cover, 1 set of measuring floating body parts, power transformer, standard liquid measuring assembly
Optional Accessories
Printer, anti-corrosive liquid measuring assembly
Power Supply
220/110 V, 50/60 Hz
External Size (W×D×H)
195×230×197 mm
Shipping Size (W×D×H)
440×180×345 mm
N.W./G.W.
1.8/4.5 kg
Solid and liquid densimeter is suitable for the field of quality management, cost control, new formula researching and material studying and so on, can be applied to measure the density of general solid material and plastic particle, powder and liquid.
Solid and Liquid Densimeter Feature:
1. Display the density of solid and liquid quickly, simple operation and stable performance.
2. With functions of automatic zero tracking, buzzer warning, and overload warning.
3. With actual water temperature compensation function.
4. With solution compensation function which is necessary if to use liquid other than water as a medium for measuring.
5. Adopt the unicase high-capacity measuring accessories with the transparent injection mould tank, which is resistant to wear, fall off and corrosion.
6. Adopts the unicase dedicated wind and dust cover, which makes the combination convenient and durable.
7. Density value can be showed by one procedure and it can measure repeatedly continuously rapid.
8. Coordinate with the operation of thermostatic tank to measure the proportion with the required temperature.
9. It is very easy to clean the measuring cup, not limitation of the size of pycnometer caliber.
10. Volatile liquid, corrosivity liquid, vicious liquid, strong acid and strong lye liquid can be measured quickly.
11. With RS-232C interface (standard); Printer is optional.
Solid and Liquid Densimeter Specification:
Model
DME-300SLE
Capacity
300 g
Display
LCD
Density Resolution
0.001 g/cm³
Weight Range
0.005—300 g
Density Range
0.001—99.999 g/cm³
Solid Mode
Measuring
Density of any form solid: metal, rubber, plastic and particle, film, floating
Temperature setting, density setting, measuring weights setting of standard sensor ball and weights setting in the water
Measuring Testing
Distilled testing
Calibration
Auto correction with one button, auto detection.
Output Interface
RS-232 interface, output and print testing data conveniently
Standard Accessories
Tank, testing board, tweezer, thermometer, 100 g weight, wind and dust cover, 1 set of measuring floating body parts, power transformer, standard liquid measuring assembly
As a professional lab and medical equipment manufacturer, Scitek Global is certified by ISO 9001, ISO 13485, ISO 45001 and ISO 14001. Almost all our products are certified by ETL, CE and FDA .
Scitek Global looks forward to establishing cooperation with more distributors all over the world, and working together to create greater customer value.
English
