| Availability: | |
|---|---|
| Quantity: | |
Ultra Water Purifier ensures comprehensive control over water quality from intake to output and storage, meeting the needs of life science laboratory applications.
With adjustable and extendable remote dispenser, enabling convenient, point-of-use dispensing while effectively preventing cross-contamination during experiments. Widely applicable ins molecular biology, cell culture, protein and nucleic acid research, and mass spectrometry/chromatography, serves as a premium water supply solution for life science laboratories.
| |
Detachable & Pipette-Style Dispensing Handle | Height Adjustable Remote Dispenser |
1. Dual independent dispensing points for RO pure water and UP ultrapure water, accommodating diverse experimental water requirements.
2. Height-adjustable, flexible remote dispenser with a detachable, pipette-style dispensing handle, ergonomic design supports flexible, convenient water dispensing.
3. Superior fluid dynamics system maintains a stable flow rate independent of the water level in the storage tank, ensuring consistent and efficient dispensing.
4. Fully automated RO membrane anti-scaling flush program, supporting automatic back-flushing upon startup and shutdown, automatically flushing during standby with full water tank.
5. Intelligently adjusts flush duration based on feed water TDS levels to prevent RO membrane scaling and extend the service life of membrane element and entire system.
6. Real-time monitoring of water quality parameters keeps users informed about feed water, pure water, and ultrapure water quality: online monitoring of RO water conductivity and temperature; online monitoring of UP water resistivity and temperature; and feed water TDS monitoring, providing alerts and solutions based on TDS values.
7. Main unit and the standard 30L storage tank are equipped with dual-wavelength (185 nm/254 nm) UV sterilization lamps, providing dual UV protection.
8. Quick-connect fitting design for easy installation and removal of filter cartridges, simplifying the consumable replacement process and making equipment maintenance efficient.
9. Built-in consumable lifespan management module monitors the remaining life of pre-treatment filters, RO membranes, purification cartridges, UV lamps, and ultra-filtration membranes, provides timely replacement reminders.
10. Multiple safety alarm and protection mechanisms ensure the safety of the equipment and the laboratory environment: includes alarms for low pressure and lack of water, automatic shutdown when the tank is full, and both audible/visual alarms and on-screen pop-up alerts in the event of insufficient supply pressure or feed water interruption.
Model | WP-U10RDE | WP-U20RDE | WP-U30RDE | WP-U40RDE | WP-U50RDE | WP-U60RDE | WP-U80RDE |
Water Output (L/H) | 10 | 20 | 30 | 40 | 50 | 60 | 80 |
Feed Water Requirement | Tap Water: TDS<200 ppm, 5–45 ℃,1.0–4.0 Kgf/cm² | ||||||
(Note: An external water softener is recommended if inlet TDS > 200 ppm) | |||||||
Display | 4.0" LCD display | ||||||
RO Water Quality | |||||||
Conductivity | Source water conductivity × 2% @25 ℃ | ||||||
UP Water Quality | |||||||
Resistivity | 18.2 MΩ·cm @25 ℃ | ||||||
TOC | <3 ppb | ||||||
Microorganism | <1 CFU/mL | ||||||
Endotoxin | <0.001 EU/mL | ||||||
Particle | None ≥ 0.22 μm | ||||||
RNases | 0.01 ng/ml | ||||||
DNases | 0.04 pg/ml | ||||||
Ion Content | Na⁺ <0.1 ppb, K⁺ <0.1 ppb, Ca²⁺ <0.1 ppb, Mg²⁺ <0.1 ppb, Fe³⁺ <0.01 ppb; | ||||||
Cl⁻ <0.1 ppb, NO₃⁻ <0.1 ppb, SO₄²⁻ <0.1 ppb, PO₄³⁻ <0.01 ppb, CO₃²⁻ <0.1 ppb, Br⁻ <0.1 ppb; | |||||||
Terminal Filter | 0.22 μm | ||||||
UV Sterilization | Dual-wavelength UV lamp, 185/254 nm | ||||||
Automatic Flushing Control | Startup, shutdown and standby flushing times automatically adjusted according to feed water TDS | ||||||
Consumable Life Monitoring | Pretreatment cartridge, RO cartridge, pre-ultrapurification cartridge, ultrapurification cartridge, UV lamp and UF membrane | ||||||
Storage Tank | 30 L, with built in 185/254 nm dual wavelength UV sterilization lamp | ||||||
Power Supply | AC 220V±10%, 50/60Hz (standard); | ||||||
AC 110V±10%, 60Hz (optional); | |||||||
Consumption | 80–120 W | ||||||
Shipping Size (W×D×H) | Main: 595×540×650 mm | ||||||
Accessories: 400×400×950 mm | |||||||
G.W. | Main: 28 kg | ||||||
Accessories: 20 kg | |||||||
Remote Dispenser | |||||||
Distance from Purification Unit to Dispenser | 1 m (custom lengths available upon request) | ||||||
Base Plate (Dia.) | 260 mm | ||||||
External Size (L×W) | 730×480 mm | ||||||
Shipping Size (W×D×H) | 300×300×600 mm | ||||||
N.W./G.W. | 3.5/4.5 kg | ||||||