Rotating Flask Capacity: 500 mL Receiving Flask Capacity: 500 mL Condensation Area (㎡): About 0.17 ㎡ Maximum Evaporation Capacity (Water): About 0.9 L/h Rotational Speed: 0–120 rpm Lifting Travel Range: 0–120 mm
RE-50R and RE-50RC adopt loose phillips screw, allowing the host to be tilted for enhanced operational flexibility.
1. Host rotation: Composed of a stable and reliable set of micro motors, tachogenerator, and integrated circuits. Under the action of electronic speed regulation, it can achieve stepless speed regulation from 0 to 120 revolutions per minute.
2. Host lifting: Adopting a screw driven manual and electric lifting system (electric lifting system only for RE-50RC). Simply rotate the handwheel on top of the column or press the lifting button (button only for RE-50RC) to raise or lower the main unit, which is simple and reliable.
3. Host tilt: Loose Phillips screw tilt the machine head freely within the range of 0–15 degree. The condensation system made of heat-resistant high-quality glass is mounted on the host and can tilt accordingly, adjusting the angle of the rotating bottle to the desired position for continuous feeding.
4. A sealed resistance wire heating element is employed, integrated with PID automatic control to ensure stable and precise temperature regulation.
5. PTFE and fluorinated rubber dual seal, matched with PTFE glass shaft, make it corrosion-resistant, pollution-free, and can maintain high vacuum.
6. Made of corrosion-resistant stainless steel to extend its service life.
7. The glass piece is made of GG17 high boron glass.
Specification:
Model
RE-50R
RE-50RC
Rotating Flask
Capacity
500 mL
Caliber
24# standard ground joint
Receiving Flask
Capacity
500 mL
Caliber
24# standard ground joint
Feeding Switch
19# standard ground joint，9 mm barb fitting
Condenser
Vertical coiled tube with spherical ground joint
Vertical coiled tube
Condenser Size (Dia.×H)
85×360 mm
Condensation Area
About 0.17 ㎡
Condenser Circulation Connection Port
11 mm OD barb fitting
Seal
Teflon and fluororubber combination double seal
Temperature Control Accuracy
±1 ℃
Rotational Speed
0-120 rpm
Screen Display
Temperature and speed digital display
Temperature Control
Button
Speed Control
Knob
Motor Power
30 W
Bath Pot Lifting Method
Manual lifting
Electric lifting
Bath Pot Lifting Travel Range
0–120 mm
Maximum Evaporation Capacity (Water)
About 0.9 L/h
Vacuum Degree
-0.098 Mpa
Power Supply
220 V, 50Hz
Temperature Control Range
Water bath, RT to 99 ℃; oil bath, RT to 180 ℃
Bath Pot
Inner Liner Material
304 stainless steel
Inner Liner Size (Dia.×H)(mm)
220×120
220×125
Capacity
1 L
Heating Power
1 kW
Size (D×W×H)(mm)
250×370×175 mm
Size (D×W×H)(mm)
≈660×365×900
≈660×420×860
Shipping Size (D×W×H)(mm)
570×490×490
G.W.
24 kg
Recommended Equipment (excluding)
Circulating water vacuum pump VP-DIIIS and low-temperature coolant circulation pump LTC-510
Advantage:
1. Host rotation: Composed of a stable and reliable set of micro motors, tachogenerator, and integrated circuits. Under the action of electronic speed regulation, it can achieve stepless speed regulation from 0 to 120 revolutions per minute.
2. Host lifting: Adopting a screw driven manual and electric lifting system (electric lifting system only for RE-50RC). Simply rotate the handwheel on top of the column or press the lifting button (button only for RE-50RC) to raise or lower the main unit, which is simple and reliable.
3. Host tilt: Loose Phillips screw tilt the machine head freely within the range of 0–15 degree. The condensation system made of heat-resistant high-quality glass is mounted on the host and can tilt accordingly, adjusting the angle of the rotating bottle to the desired position for continuous feeding.
4. A sealed resistance wire heating element is employed, integrated with PID automatic control to ensure stable and precise temperature regulation.
5. PTFE and fluorinated rubber dual seal, matched with PTFE glass shaft, make it corrosion-resistant, pollution-free, and can maintain high vacuum.
6. Made of corrosion-resistant stainless steel to extend its service life.
7. The glass piece is made of GG17 high boron glass.
Specification:
Model
RE-50R
RE-50RC
Rotating Flask
Capacity
500 mL
Caliber
24# standard ground joint
Receiving Flask
Capacity
500 mL
Caliber
24# standard ground joint
Feeding Switch
19# standard ground joint，9 mm barb fitting
Condenser
Vertical coiled tube with spherical ground joint
Vertical coiled tube
Condenser Size (Dia.×H)
85×360 mm
Condensation Area
About 0.17 ㎡
Condenser Circulation Connection Port
11 mm OD barb fitting
Seal
Teflon and fluororubber combination double seal
Temperature Control Accuracy
±1 ℃
Rotational Speed
0-120 rpm
Screen Display
Temperature and speed digital display
Temperature Control
Button
Speed Control
Knob
Motor Power
30 W
Bath Pot Lifting Method
Manual lifting
Electric lifting
Bath Pot Lifting Travel Range
0–120 mm
Maximum Evaporation Capacity (Water)
About 0.9 L/h
Vacuum Degree
-0.098 Mpa
Power Supply
220 V, 50Hz
Temperature Control Range
Water bath, RT to 99 ℃; oil bath, RT to 180 ℃
Bath Pot
Inner Liner Material
304 stainless steel
Inner Liner Size (Dia.×H)(mm)
220×120
220×125
Capacity
1 L
Heating Power
1 kW
Size (D×W×H)(mm)
250×370×175 mm
Size (D×W×H)(mm)
≈660×365×900
≈660×420×860
Shipping Size (D×W×H)(mm)
570×490×490
G.W.
24 kg
Recommended Equipment (excluding)
Circulating water vacuum pump VP-DIIIS and low-temperature coolant circulation pump LTC-510
As a professional lab and medical equipment manufacturer, Scitek Global is certified by ISO 9001, ISO 13485, ISO 45001 and ISO 14001. Almost all our products are certified by ETL, CE and FDA .
Scitek Global looks forward to establishing cooperation with more distributors all over the world, and working together to create greater customer value.
English
