| Availability: | |
|---|---|
| Quantity: | |

| Model | WP-PGM10U | WP-EGM10U | WP-TGM10U | WP-SGM10U |
|---|---|---|---|---|
| WP-PGM20U | WP-EGM20U | WP-TGM20U | WP-SGM20U | |
| WP-PGM30U | WP-EGM30U | WP-TGM30U | WP-SGM30U | |
| Model Features | Basic | Added UF heat removal column | Added UV germicidal lamp | Added UV sterilizer lamp and heat source removal column |
| Water Output (L/H) | 10/20/30 | 10/20/30 | 10/20/30 | 10/20/30 |
| Water Quality Monitoring | Dual waterway online monitoring (can display RO conductivity value and UP resistivity value at the same time). | |||
| Ion Rejection Rate | 97%-99% (when using a new RO membrane) | |||
| Organic Matter Rejection Rate | >99% (when MW>200 Dalton) | |||
| Particle and Bacterial Rejection | > 99% | |||
| Application | Clean glassware | |||
| UP Water Parameter(ASTM TYPE I grade water) | ||||
| Resistivity (25℃) | 18.25 M Ω. Cm @ 25 ℃ | |||
| Heavy Metal Ion | < 0.01 ppb | |||
| Total Organic Carbon (TOC) | <10 ppb | <3 ppb | ||
| Bacteria | < 1 cfu/ml (Use pressure water tank) | |||
| < 0.01 cfu/ml (Use Sterile water tank) | ||||
| Particulate Matter (> 0.22 μm) | <1/ml | |||
| Pyrogen (endotoxin) | N/A | < 0.001 Eu/ml | N/A | < 0.001 Eu/ml |
| RNases | N/A | <1pg/ml | N/A | <1pg/ml |
| DNases | N/A | <5pg/ml | N/A | <5pg/ml |
| Electrical Requirements | 100V-240/50-60Hz, 48-72W | |||
| Standard Accessories | 1. Main Machine (including 1 set of purification column) | |||
| 2. 12L external pressure water tank | ||||
| 3. TDS pen | ||||
| 4. Accessory bag | ||||
| Optional Accessories | 1. Sterile water tank | |||
| 2. Water collection arm | ||||
| 3. Silicon removal device | ||||
| 4. Boron removal device | ||||
| Instrument Size (W×D×H)(mm) | 312x475x475 | |||
| Shipping Size (W×D×H)(mm) | 620x640x680 | |||
| N.W./G.W. (kg) | 30/40 | |||
Backlit LCD display with dual-channel online monitoring; simultaneously displays RO conductivity, UP resistivity, and system operating status.
Comprehensive management functions for RO pure water and ultrapure water production, dispensing, and system circulation.
Automated anti-scaling flushing for RO membranes, automatic shutdown upon feed water interruption, automatic water shut-off when stopped, automatic reservoir refilling, and automatic shutdown when the reservoir is full.
Customizable water quality parameters; the system triggers an alarm if water quality falls below set standards, effectively preventing the use of substandard water.
Programmable dispensing duration; touch-button operation with automatic indicator lights for pure water and ultrapure water dispensing.
Portable TDS meter for on-the-go measurement of TDS levels, conductivity, and water temperature.
Front and rear access design allows for quick and convenient filter cartridge replacement without the need for tools.
ABS engineering plastic housing with powder-coated finish; supports water quality and volume upgrades; features a self-closing door design.
Operates on low-voltage 24V DC power, ensuring safety and preventing personal injury during operation in humid environments.
Online management of consumables.
WP-P: All kinds of physical and chemical testing, biochemical analysis, blood examination, microanalysis, flushing special, HPLC, IC, GC, analysis experiment
WP-E: High sensitivity ICP/MS, PCR, PPT level analysis, isotope analysis, molecular biology, life science, CDC, drug control institute, quality inspection institute
WP-T: Atomic absorption/emission spectrometry, mass spectrometry, TOC detection, environmental monitoring, biochip development, trace organic matter analysis
WP-S: Molecular biology, Life sciences, gene research, cell culture, amino acid analysis, protein purification, toxicology, drug development, medical testing
Main Machine
Optional Sterile water tank
Optional Water collection arm