Pocket Conductivity Meter Specifications:
| Model | CON-P20 | CON-P30 | CON-P40 |
|---|
| Conductivity | Range | 0~20.00, 200.0, 2000µS/cm, 20.00mS/cm |
| Resolution | 0.01,0.1,1 |
| Accuracy | ±1% F.S. |
| Calibration Points | 1 to 3 points |
| Calibration Solutions | 84µS/cm,1413µS/cm,12.88mS/cm |
| TDS | Range | — | 0-10.00,100.0,1000ppm,20.00ppt |
| Resolution | — | 0.01,0.1,1 |
| Accuracy | — | ±1%F.S. |
| TDS Factor | — | 0.1~1.0(default 0.5) |
| Salinity | Range | — | — | 0.00-10.00ppt |
| Resolution | — | — | 0.01ppt |
| Accuracy | 一 | — | ±1%F.S. |
| Temperature | Range | 0-60°C/32~140°F |
| Resolution | 0.1°C/0.1°F |
| Accuracy | ±1°C/±1.8°F |
| Offset Calibration | 1 point, reading ±10°C |
| Other Specifications | Temperature Compensation | 0~60°C, automatic |
| Temperature Coefficient | 2%/°C |
| Reference Temperature | 25°C |
| Cell Constant | K=1 |
| Hold Function | Manual or auto-endpoint |
| Auto-Off | 8 minutes after last key pressed |
| Operating Temperature | 0~50°C |
| Display | Dual-line LCD (21×21mm) |
| Power Requirements | 2×1.5V AAA batteries |
| Battery Life | Approximately 200 hours of continuous use |
| Sizes(W×D×H) | 185(L)×40(Dia.) |
| Shipping size (W×D×H)(mm) | 280x80x250 |
| N.W./G.W. (kg) | 0.1/1.5 |
Pocket Conductivity Meter Features:
These are 3 multi-range pocket conductivity meters: CON-P30, CON-P40 with TDS measurement mode, and CON-P40 with salinity test. All three conductivity meters support 1 to 3 point calibration and automatically recognize conductivity standards. It also helps customizable TDS conversion factors, and the meters are suitable for measuring conductivity and total dissolved solids of liquids with an accuracy of 1% F.S. The meters can be used for a wide range of conductivity measurements, from 1 to 3 calibration points, and automatically recognize conductivity standards.
Multi-Range pocket conductivity meter, TDS measurement mode is partially included.
Platinum-black conductivity electrode for accurate and reliable measurements.
1 to 3 point calibration, automatic recognition of conductivity standards.
Automatic temperature compensation, corrects conductivity measurements and converts readings to reference temperature.
Automatic endpoint lock, retains stable readings for easy viewing and recording.
