Halogen Moisture Analyzer: Precautions for Use

The halogen moisture analyzer is widely used for the rapid determination of moisture content in samples, and is widely used in laboratories and industry for its high efficiency and accuracy. In order to ensure the accuracy of the results and to prolong the service life of the instrument, it is necessary to strictly follow the rules of use. In this article, we will introduce the key considerations when using halogen moisture tester, including sample handling, instrument calibration, safe operation and routine maintenance. This article will help users to improve the measurement accuracy and ensure the stable operation of the equipment.

In order to use the halogen moisture meter safely and reliably, please observe the following precautions:

1. When using the halogen moisture meter, any improper operation may lead to personal danger and damage to the instrument and equipment, please follow the instructions to operate correctly.

2. Please make sure that the input voltage size and plug type indicated on the label match the AC power supply used in your local area.

3. Please make sure that the power cord does not cause any obstacles or trip hazards.

4. Do not operate the halogen moisture meter in a hazardous, wet or unstable environment.

5. Please unplug the power supply when cleaning the halogen moisture meter.

6. In the test process, please do not switch the size and frequency of the input power supply voltage (please do not switch between 110V and 220V).

7. Please make sure that there is enough space around the Halogen Moisture Meter and at least 1 meter space above.

8. Please do not make any changes to the parts and other aspects of the Halogen Moisture Meter. After-sales service should be provided only by factory-authorized professionals.

9. The Halogen Moisture Meter works by heating! Do not place any flammable material above, below or beside the Halogen Moisture Meter.

10. The Halogen Moisture Meter should be used with caution when moving the test sample during application. The sample, heating element and surrounding may be very hot and can easily cause burns, some samples require special care.

11. For any sample material with safety hazards, please carefully analyze the possible dangerous consequences. We recommend that the Halogen Moisture Meter should be kept by a person responsible for storage.

12. Flammable or explosive samples will produce flammable or explosive gases or vapors when heated. When working with such samples, please work in a dry environment with a low enough temperature to avoid fire or explosion.

13. Containing toxic or corrosive components of the material should only be dried in the fume hood.

14. Samples containing corrosive solvents will evaporate once heated and release corrosive gases, so it is recommended to take a small amount of the substance for testing.

15. Do not exceed the maximum weighing capacity of the instrument when weighing. This may damage the weighing system.

16. It is strictly forbidden to exceed the maximum load (maximum weighing capacity) specified for the instrument by shock and overloading, or by subtracting a possible tare load. The instrument is likely to be damaged as a result.

17. Do not operate the instrument in an explosive environment.