| Availability: | |
|---|---|
| Model | GA3202 |
|---|---|
| Heating Steps | 9 Steps |
| Temperature Range (Nominal Temperature) | 20℃-3000℃ |
| Slope Heating Time | 0-999s |
| Heating Holding Time | 1s~999s (the sum of both time should be less than 999 seconds) |
| Inert Gas Needed | Argon, pressure of entry larger than 0.3Mpa |
| Cooling Water | Tap water or cycling water, flow rate no less than 2L/min |
| Output | LCD |
| Power Source | 220V±22V, 50Hz±1Hz, 3A 220V±22V, 50Hz±1Hz, 30A |
| Power | 5.1kW for 220V on about 2700℃ |
| Ambient Temperature | +10℃ - +30℃ |
| Relative Humidity | Less than 85% |
| Instrument Rating Power | 7.2kW |
| Gas pressure alarm, furnace overheated alarm | |
| Interface with Atomic absorption spectrophotometer, autosampler and RS232 | |
| High-power temperature heating function (1000℃~2700℃) | |
| Test sample together with atom absorption equipment. Cd ≤1×10^-12g; Cu ≤1×10^-10g | |
| Model | GA3202 |
|---|---|
| Heating Steps | 9 Steps |
| Temperature Range (Nominal Temperature) | 20℃-3000℃ |
| Slope Heating Time | 0-999s |
| Heating Holding Time | 1s~999s (the sum of both time should be less than 999 seconds) |
| Inert Gas Needed | Argon, pressure of entry larger than 0.3Mpa |
| Cooling Water | Tap water or cycling water, flow rate no less than 2L/min |
| Output | LCD |
| Power Source | 220V±22V, 50Hz±1Hz, 3A 220V±22V, 50Hz±1Hz, 30A |
| Power | 5.1kW for 220V on about 2700℃ |
| Ambient Temperature | +10℃ - +30℃ |
| Relative Humidity | Less than 85% |
| Instrument Rating Power | 7.2kW |
| Gas pressure alarm, furnace overheated alarm | |
| Interface with Atomic absorption spectrophotometer, autosampler and RS232 | |
| High-power temperature heating function (1000℃~2700℃) | |
| Test sample together with atom absorption equipment. Cd ≤1×10^-12g; Cu ≤1×10^-10g | |