Availability: | |
---|---|
Quantity: | |
Model | TOC-A3000 |
---|---|
Detector | NDIR |
Method | Wet Method |
Parameters | TC, TIC, TOC, NPOC |
Digestion Mode | Wet Chemical Oxidation by UV |
Operation Mode | PC software Control |
Application | Liquid Sample |
Gas Requirement | Nitrogen ≥99.995% |
Measurement Range | 0-10000mg/l(ppm) |
Detection Limit | 50μg/l (ppb) |
Repeatability | 3% |
Maximum Salinity | 85g/l |
Power Supply | AC 220V, 50/60Hz; 110V, 50/60Hz |
Power | 200W |
Size(W×D×H)(mm) | 430x455x440 |
Shipping Size (W×D×H)(mm) | 670x620x690 |
N.W./G.W. (kg) | 25/50 |
High-performance processor,ensuring stable and reliable system running.
Modular design,simplifying device operation and maintenance.
PID temperature controlling technology,reaching higher accuracy.
Precise gas flow control technology improves accuracy.
Unique three-stage dehydration technology improves drying efficiency.
Optional 20-position autosampler saves 80% time and energy.
Unique liquid path and flow control system extend the service life of catalyst.
Real-time monitoring of diluted water and waste water.
Multi-functional PC software,complying with the requirements of GMP.
Personalized standard curve management provides great convenience for users.
Consumables management reminds users to replace consumables in time.
680℃ catalytic oxidation technology with Platinum catalyst, especially for seawater test.
Imported NDIR detector,guaranteeing higher sensitivity and stability.
High Temperature Pyrolysis Module
Pyrolysis temperature can be set as required.
Precision temperature control system, the highest temperature 1000℃
IC Reaction Module
Complete IC digestion by acid-adding and heating.
Electronic cooling system, filter and membrane dryer effectively remove the water vapor.
NDIR Detector
Imported light source, detector and special gas chamber.
Stable results, lower noise, wider detection range and faster speed.
A constant temperature environment ensures high stability and accuracy.
Model | TOC-A3000 |
---|---|
Detector | NDIR |
Method | Wet Method |
Parameters | TC, TIC, TOC, NPOC |
Digestion Mode | Wet Chemical Oxidation by UV |
Operation Mode | PC software Control |
Application | Liquid Sample |
Gas Requirement | Nitrogen ≥99.995% |
Measurement Range | 0-10000mg/l(ppm) |
Detection Limit | 50μg/l (ppb) |
Repeatability | 3% |
Maximum Salinity | 85g/l |
Power Supply | AC 220V, 50/60Hz; 110V, 50/60Hz |
Power | 200W |
Size(W×D×H)(mm) | 430x455x440 |
Shipping Size (W×D×H)(mm) | 670x620x690 |
N.W./G.W. (kg) | 25/50 |
High-performance processor,ensuring stable and reliable system running.
Modular design,simplifying device operation and maintenance.
PID temperature controlling technology,reaching higher accuracy.
Precise gas flow control technology improves accuracy.
Unique three-stage dehydration technology improves drying efficiency.
Optional 20-position autosampler saves 80% time and energy.
Unique liquid path and flow control system extend the service life of catalyst.
Real-time monitoring of diluted water and waste water.
Multi-functional PC software,complying with the requirements of GMP.
Personalized standard curve management provides great convenience for users.
Consumables management reminds users to replace consumables in time.
680℃ catalytic oxidation technology with Platinum catalyst, especially for seawater test.
Imported NDIR detector,guaranteeing higher sensitivity and stability.
High Temperature Pyrolysis Module
Pyrolysis temperature can be set as required.
Precision temperature control system, the highest temperature 1000℃
IC Reaction Module
Complete IC digestion by acid-adding and heating.
Electronic cooling system, filter and membrane dryer effectively remove the water vapor.
NDIR Detector
Imported light source, detector and special gas chamber.
Stable results, lower noise, wider detection range and faster speed.
A constant temperature environment ensures high stability and accuracy.