Availability: | |
---|---|
Model | WP-PL10U |
---|---|
WP-PL20U | |
WP-PL30U | |
Inlet Water Source | Urban tap water TDS<200ppm, inlet water pressure: 0.1-0.4MPa, water temperature 5-45°C |
Water-making Speed | 10L/H |
20L/H | |
30L/H | |
Water Flow Speed | 1.5-2L/min (requires pressure bucket) |
2 Water Outlets | RO pure water and Ultra pure water |
Output Water Quality | RO pure water: desalination rate as high as 95-99%, Conductivity ≤10μS/cm |
Ultra pure water: resistivity 18.2MΩ.cm@25°C, TOC: <10 ppb, particles (>0.22 um) <1/ml, microorganism <0.1cfu/ml | |
Scope of Application | Various physical and chemical tests, biochemical analysis, blood tests, micro-analysis, washing, HPLC, IC, GC, analytical experiments. |
Power | 220V/50Hz; 120W |
Standard Configuration | Main unit (including 1 set of filters) + Built-in 8L pressure tank + end point filter+accessory package |
Sizes(W×D×H)(mm) | 470x450x550 |
Shipping Size (W×D×H)(mm) | 550x630x680 |
N.W./G.W. (kg) | 30/45, 31/46, 31/46 |
Adaptable to the treatment needs of different water sources
Highly efficient water production speed can meet different experimental and industrial water needs, ensuring highly efficient water production capacity.
The exclusion rate of soluble organic matter reaches more than 99%, which enables it to efficiently remove organic pollutants from water in its application.
The high efficiency particulate rejection rate is extremely high, ensuring that particulate matter in water is effectively removed, guaranteeing pure water quality for experiments and industrial processes.
Retention of microorganisms up to 99%, to ensure that the water does not contain harmful bacteria, in line with the requirements of high purity water quality
Controlled RO water quality ensures that RO water quality is at the required low salinity level.
Provides two independent water outlets to meet the water quality requirements of different experimental and application scenarios.
Model | WP-PL10U |
---|---|
WP-PL20U | |
WP-PL30U | |
Inlet Water Source | Urban tap water TDS<200ppm, inlet water pressure: 0.1-0.4MPa, water temperature 5-45°C |
Water-making Speed | 10L/H |
20L/H | |
30L/H | |
Water Flow Speed | 1.5-2L/min (requires pressure bucket) |
2 Water Outlets | RO pure water and Ultra pure water |
Output Water Quality | RO pure water: desalination rate as high as 95-99%, Conductivity ≤10μS/cm |
Ultra pure water: resistivity 18.2MΩ.cm@25°C, TOC: <10 ppb, particles (>0.22 um) <1/ml, microorganism <0.1cfu/ml | |
Scope of Application | Various physical and chemical tests, biochemical analysis, blood tests, micro-analysis, washing, HPLC, IC, GC, analytical experiments. |
Power | 220V/50Hz; 120W |
Standard Configuration | Main unit (including 1 set of filters) + Built-in 8L pressure tank + end point filter+accessory package |
Sizes(W×D×H)(mm) | 470x450x550 |
Shipping Size (W×D×H)(mm) | 550x630x680 |
N.W./G.W. (kg) | 30/45, 31/46, 31/46 |
Adaptable to the treatment needs of different water sources
Highly efficient water production speed can meet different experimental and industrial water needs, ensuring highly efficient water production capacity.
The exclusion rate of soluble organic matter reaches more than 99%, which enables it to efficiently remove organic pollutants from water in its application.
The high efficiency particulate rejection rate is extremely high, ensuring that particulate matter in water is effectively removed, guaranteeing pure water quality for experiments and industrial processes.
Retention of microorganisms up to 99%, to ensure that the water does not contain harmful bacteria, in line with the requirements of high purity water quality
Controlled RO water quality ensures that RO water quality is at the required low salinity level.
Provides two independent water outlets to meet the water quality requirements of different experimental and application scenarios.